Wheeleez® Tire changing procedure

• Deflate tire
• Remove nuts (4) from back side of wheel. 10mm or adjustable wrenches required.
• Remove bolts and Bearing Retainer Rings.
• Separate Hub Halves by pulling apart gradually.
• Remove Bearings/Bushings from Hub Halves and replace if visibly worn.
• Remove old tire and discard.
• Reverse procedure for installation of new tire. Wiggle tire/hub halves to seat together.
• Inflate to proper PSI (See side of tire for correct pressure.)

Hint: Change 1 tire at a time leaving other(s) assembled as reference when re-assembling. 

Tools required:

1. 10mm or adjustable wrenches socket/ratchets or nut driver required to remove nuts &  bolts.
2. Tire Pump (see below)
3. Low Pressure Gauge (see below)

Low Pressure Tire Gauge, Pump, and Valve Caps:

See larger image See larger image See larger image (Not to scale) WZ1-TK-SET Be sure to read our complete repair guide. This kit includes: Tire Repair Instructions One Low Pressure Tire Gauge One tire pump Set of four valve caps with built in valve core removal tool Allow 2 days for order processing plus transit time.

Tell a friend about Wheeleez®