ZURB Menu

Wheeleez

HOME > Wagon Conversion Kit
SocialTwist Tell-a-Friend
View Cart

Wagon Conversion Kit

Model # WZ1-WCK-24UD and WZ1-WCK-30UD

Features

  • Detachable 24 or 30 cm beach wheels.
  • Stainless Steel hardware.
  • Painted steel handle, rear and front undercarriage.
  • Drilling template.

Capacity

Payload capacity: 24 cm wheels: 70 kg (155 lbs)
30 cm wheels: 113 kg (250 lbs)

Weight

Weight: 24 cm wheels: 4.5 kg (10 lbs)
30cm wheels: 7.7 kg (17 lbs)

Dimensions

24 cm wheels 30 cm wheels
Undercarriage Frame
28 L x 4 W x 18cm H (11 x 1.5 x 7") Axles
68.5cm L x 16mm dia. (27 x 5/8")
Balloon wheels
24 x 13cm (9.75 x 5")
Undercarriage Frame
28 L x 4 W x 18cm H (11 x 1.5 x 7")
Axles
68.5cm L x 16mm dia. (27 x 5/8")
Balloon wheels
30 x 18 CM (11.7 x 7")

Materials

Axles: Yellow zinc dichromate coated.
Undercarriage: High impact, polypropylene plastic.
Handle: Powder coated steel with plastic grip.
Wheels: Tires PU, Hubs Polypropylene, Hardware stainless steel.

Assembly

  1. Remove stock wheels and undercarriages. Using the Hole Drilling Diagram, mark drill hole locations on the bottom of wagon. Drill appropriate holes for front and rear undercarriages (Photo A)
  2. Position front and rear undercarriages over holes in wagon bottom (Photo B). From inside wagon tub, insert round head type machine screws (inset photo B) down through deck and undercarriages. Nuts & washers should fasten under wagon; checking fit as you tighten. When correct tighten all nuts with hand tools.
  3. Install Spacer Tubes (see chart above) and WheelEEZ® wheels onto axles. Use Quick Clip Pins to hold wheels on the axle. (Photo C)
  4. Install Handle with White Warning label facing wagon. (Photo D). Note: Undercarriage mounting hardware is not included because bolt/screw length requirement will vary based on thickness of platform or wagon to which undercarriages are mounting. Check if existing wagon hardware could be used.

IMPORTANT: ROLL AT WALKING SPEED ONLY!
DO NOT TOW WITH MOTORIZED VEHICLES.


Upgrade your wagon so that it can handle soft sand and other challenging terrain. These Beach Wagon Conversion kits bold on to standard wagons or DIY wagon projects you build yourself. The beach is no longer off limits to your wagon. Haul heavy loads effortlessly. Make one trip instead of many carrying gear to the beach. These low-pressure balloon wheels glide easily over the sand.

This Beach Wagon Conversion Kit includes:
1 – Handle, front and rear undercarriage
4 – Wheeleez® 24 cm or 30 cm polyurethane wheels
3 – Sets of axle spacer tubes
4 – Quick Clip Pins

with
24 cm wheels
with 30 cm wheels
Kayak Cart-Beach Kayak Cart-Beach
Add To Cart Add To Cart